Venza AWD L4-2.7L (1AR-FE) (2009)
/Page-2618001.png)
Hazard Warning Flasher: Testing and Inspection
LIGHTING (EXT): TURN SIGNAL FLASHER ASSEMBLY: INSPECTION
INSPECTION
1. INSPECT TURN SIGNAL FLASHER ASSEMBLY
(a) Disconnect the D34 turn signal flasher assembly connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
If the result is not as specified, repair or replace the wire harness or connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, repair or replace the wire harness or connector.
