Venza AWD L4-2.7L (1AR-FE) (2009)
Headlamp Alignment Sensor: Testing and Inspection
LIGHTING (EXT): HEIGHT CONTROL SENSOR: INSPECTION
INSPECTION
1. INSPECT REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH (for 2WD)
(a) Connect 3 dry cell batteries (1.5 V) in series.
(b) Connect a positive (+) lead from the batteries to terminal 3 (SHB) and a negative (-) lead from the batteries to terminal 1 (SHG).
(c) Measure the voltage between terminals 2 (SHRR) and 1 (SHG) while slowly moving the link up and down.
Standard Voltage:
Text in Illustration
If the result is not as specified, replace the rear height control sensor sub-assembly RH.
2. INSPECT REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH (for AWD)