Venza AWD L4-2.7L (1AR-FE) (2009)
/Page-2666010.png)
(4) for HORN relay
1. Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
HINT: If the result is not as specified, replace the integration relay.
(5) for H-LP LO (LH) relay
1. Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
HINT: If the result is not as specified, replace the integration relay.
