Venza AWD L4-2.7L (1AR-FE) (2009)
(a) Disengage the 2 claws and remove the power outlet socket assembly.
Installation
POWER OUTLETS (INT): REAR POWER OUTLET SOCKET: INSTALLATION
INSTALLATION
1. INSTALL POWER OUTLET SOCKET ASSEMBLY (w/ Voltage Inverter)
(a) Engage the 2 claws to install the power outlet socket assembly.
2. INSTALL SIDE TRIM COVER RH (w/ Voltage Inverter) See: Accessories and Optional Equipment/Entertainment Systems/Auxiliary Input /
Output Jack/Service and Repair/Installation
3. INSTALL REAR POWER POINT SOCKET COVER
(a) Engage the 2 claws to install the rear power point socket cover.
4. INSTALL REAR POWER POINT SOCKET ASSEMBLY
(a) Engage the 2 claws to install the rear power point socket assembly as shown in the illustration.
5. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
6. CONNECT REAR SEAT OUTER BELT ASSEMBLY RH
HINT: Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation.
7. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
HINT: Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and