Venza AWD L4-2.7L (1AR-FE) (2009)
Power Distribution Module: Testing and Inspection
POWER OUTLETS (INT): VOLTAGE INVERTER: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. INSPECT VOLTAGE INVERTER ASSEMBLY
HINT: Remove interior parts so that the voltage inverter assembly can be seen.
(a) Disconnect the voltage inverter assembly connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
HINT: If the result is not as specified, repair or replace harness or connector.
(c) Reconnect the voltage inverter assembly connector.
(d) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration