Venza AWD L4-2.7L (1AR-FE) (2009)
Repair/Installation
4. CONNECT REAR SEAT OUTER BELT ASSEMBLY RH
HINT: Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation.
5. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
HINT: Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation.
6. INSTALL RECLINING REMOTE CONTROL BEZEL RH
HINT: Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation.
7. INSTALL REAR SEAT ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for RH Side)/Installation
8. CONNECT REAR SEAT RECLINING CONTROL CABLE See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for RH
Side)/Installation
9. INSTALL REAR SEAT OUTER TRACK BRACKET COVER See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for RH
Side)/Installation
10. INSTALL REAR SEAT INNER TRACK BRACKET COVER See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for RH
Side)/Installation
11. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for RH
Side)/Installation
12. INSTALL REAR SEAT HEADREST ASSEMBLY See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for RH
Side)/Installation
13. INSTALL REAR FLOOR FINISH PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
14. INSTALL REAR SEAT SUB FLOOR PANEL ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
15. INSTALL NO. 1 DECK BOARD See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
16. INSTALL DECK SIDE TRIM BOX RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
17. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
18. INSTALL DECK SIDE TRIM BOX LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
19. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
20. INSTALL DECK BOARD ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
21. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
22. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
HINT: Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation.
23. INSTALL REAR DOOR SCUFF PLATE RH
HINT: Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation.