Venza AWD L4-2.7L (1AR-FE) (2009)
Information Bus: Reading and Clearing Diagnostic Trouble Codes
NETWORKING: LIN COMMUNICATION SYSTEM: DTC CHECK / CLEAR
DTC CHECK / CLEAR
1. CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Smart Key. Main Body or Power Source Control / Trouble Codes.
(e) Check the details of the DTC(s) See: Testing and Inspection/Diagnostic Trouble Code Descriptions/LIN Communication System.
2. CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body / Entry Electrical / Smart Key. Main Body or Power Source Control / Trouble Codes.
(e) Clear the DTC(s).