Venza AWD L4-2.7L (1AR-FE) (2009)
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 1 JUNCTION CONNECTOR - CAN
NO. 2 JUNCTION CONNECTOR)
OK -- Continue to next step.
13. CHECK FOR SHORT IN CAN BUS WIRE (CAN NO. 2 JUNCTION CONNECTOR - DLC3)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO DLC3
OK -- Continue to next step.
Part 2
NETWORKING: CAN COMMUNICATION SYSTEM: Check CAN Bus Lines for Short Circuit
Check CAN Bus Lines for Short Circuit
(CONTINUED)
14. CHECK FOR SHORT IN CAN BUS WIRE (CAN NO. 2 JUNCTION CONNECTOR - COMBINATION METER)