Venza AWD L4-2.7L (1AR-FE) (2009)
/Page-998030.png)
NG -- REPLACE YAW RATE SENSOR
OK -- Continue to next step.
24. CHECK FOR SHORT IN CAN BUS WIRES (STEERING ANGLE SENSOR)
(a) Reconnect the steering angle sensor connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE STEERING ANGLE SENSOR
OK -- Continue to next step.
25. CHECK FOR SHORT IN CAN BUS WIRE (POWER STEERING ECU)
(a) Reconnect the power steering ECU connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
