Venza AWD L4-2.7L (1AR-FE) (2009)
/Page-998102.png)
NG -- REPAIR OR REPLACE CAN BUS MAIN WIRE OR CONNECTOR (CAN NO. 2 JUNCTION CONNECTOR -
COMBINATION METER)
OK -- REPLACE COMBINATION METER
18. CHECK FOR SHORT TO GND IN CAN BUS WIRE (CAN NO. 2 JUNCTION CONNECTOR - CERTIFICATION ECU)
(a) Disconnect the certification ECU connector.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
