Venza AWD L4-2.7L (1AR-FE) (2009)
B. Disengage the 6 guides by pulling the defroster nozzle garnish toward the rear of the vehicle.
C. Disconnect the connector and remove the defroster nozzle garnish.
3. Apply felt to the LH rear claw.
A. Cut a piece of felt from the Interior Noise Kit (P/N 08231-00801) to the following dimensions.
Felt: 15 x 15 x 1.5 mm thick (0.6 x 0.6 x 0.06 in. thick)