Venza AWD L4-2.7L (1AR-FE) (2009)
Variable Induction Control Valve: Service and Repair
Removal
1AR-FE INTAKE / EXHAUST: VACUUM SWITCHING VALVE (for ACIS): REMOVAL
REMOVAL
1. REMOVE FRONT WIPER ARM HEAD CAP See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Removal
2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal
3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal
4. REMOVE FRONT FENDER TO COWL SIDE SEAL LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal
5. REMOVE FRONT FENDER TO COWL SIDE SEAL RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal
6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Removal
7. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Removal
8. REMOVE OUTER COWL TOP PANEL See: Steering and Suspension/Suspension/Suspension Strut / Shock Absorber/Service and Repair/Front
Shock Absorber/Removal
9. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
10. REMOVE VACUUM SWITCHING VALVE ASSEMBLY (for ACIS)
(a) Disconnect the 2 vacuum hoses, clamp and connector.
(b) Remove the bolt and vacuum switching valve assembly (for ACIS).