Venza AWD L4-2.7L (1AR-FE) (2009)
5. REMOVE REAR SEAT ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for LH Side)/Removal
6. REMOVE REAR CENTER SEAT INNER BELT ASSEMBLY
(a) Remove the nut and the rear center seat inner belt assembly.
Installation
SEAT BELT: REAR CENTER SEAT INNER BELT ASSEMBLY: INSTALLATION
INSTALLATION
1. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY
(a) Install the rear center seat inner belt assembly with the nut.
Text in Illustration
Torque: 42 Nm (428 kgf-cm, 31ft-lbf)
NOTICE: Do not allow the anchor part of the rear seat outer belt assembly to overlap the protruding part of the floor panel.
2. INSTALL REAR SEAT ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for LH Side)/Installation
3. CONNECT REAR SEAT NO. 2 RECLINING CONTROL CABLE SUB-ASSEMBLY See: Body and Frame/Seats/Service and Repair/Rear Seat
Assembly (for LH Side)/Installation
4. INSTALL REAR SEAT INNER TRACK BRACKET COVER See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for LH
Side)/Installation
5. INSTALL REAR SEAT OUTER TRACK BRACKET COVER See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for LH
Side)/Installation
6. INSTALL REAR SEAT HEADREST ASSEMBLY See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for LH Side)/Installation