Venza AWD L4-2.7L (1AR-FE) (2009)
Fog/Driving Lamp Switch: Service and Repair
Removal
LIGHTING (EXT): HEADLIGHT DIMMER SWITCH: REMOVAL
REMOVAL
1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system
See: Restraint Systems/Air Bag Systems/Service Precautions.
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Repair Instruction - Initialization.
3. REMOVE LOWER NO. 3 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Removal
4. REMOVE LOWER NO. 2 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Removal
5. REMOVE STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Removal
6. REMOVE STEERING WHEEL ASSEMBLY See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Removal
7. REMOVE LOWER STEERING COLUMN COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Removal
8. REMOVE UPPER STEERING COLUMN COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Removal
9. REMOVE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral
Cable/Service and Repair/Removal
10. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY See: Sensors and Switches - Wiper and Washer Systems/Wiper Switch/Service and
Repair/Removal
11. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY
(a) Disconnect the connector.
(b) Disengage the clamp as shown in the illustration.
(c) Disengage the claw and remove the headlight dimmer switch assembly as shown in the illustration.