Venza AWD L4-2.7L (1AR-FE) (2009)
Headlamp Alignment Sensor: Service and Repair
Removal
LIGHTING (EXT): HEIGHT CONTROL SENSOR: REMOVAL
REMOVAL
1. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY (for 2WD)
(a) Disconnect the connector.
(b) Remove the 3 nuts and rear height control sensor sub-assembly.
2. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY (for AWD)
(a) Disconnect the connector.
(b) Remove the 3 nuts and rear height control sensor sub-assembly.