Venza AWD L4-2.7L (1AR-FE) (2009)
/Page-481002.png)
(b) Disconnect the connector.
(c) Disconnect the connector clamp from the ignition switch.
Installation
1AR-FE STARTING: IGNITION SWITCH: INSTALLATION
INSTALLATION
1. INSTALL IGNITION SWITCH
(a) Connect the connector.
(b) Install the connector clamp to the ignition switch.
(c) Install the ignition switch with the 2 screws.
2. INSTALL UPPER STEERING COLUMN COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Installation
3. INSTALL LOWER STEERING COLUMN COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Installation
