Venza AWD L4-2.7L (1AR-FE) (2009)
Power Window Switch: Testing and Inspection
Rear Power Window Switch
WINDOW / GLASS: REAR POWER WINDOW SWITCH: INSPECTION
INSPECTION
1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (for Rear LH)
(a) Check the switch function.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
If the result is not as specified, replace the power window regulator switch assembly (for rear LH side).
(b) Check that the LED illuminates.
(1) Apply battery voltage to the power window regulator switch assembly and check that the LED illuminates.
OK: