Venza AWD L4-2.7L (1AR-FE) (2009)
16. REMOVE POWER POINT SOCKET ASSEMBLY
(a) Using a screwdriver, disengage the 2 claws and remove the power point socket assembly as shown in the illustration.
Text in Illustration
HINT: Tape the screwdriver tip before use.
17. REMOVE POWER POINT SOCKET COVER
(a) Disengage the 2 claws and remove the power point socket cover.
Installation
POWER OUTLETS (INT): POWER OUTLET SOCKET: INSTALLATION
INSTALLATION
1. INSTALL POWER POINT SOCKET COVER
(a) Engage the 2 claws to install the power point socket cover.
2. INSTALL POWER POINT SOCKET ASSEMBLY
(a) Engage the 2 claws to install the power point socket assembly as shown in the illustration.
3. INSTALL CONSOLE BOX SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and