Venza AWD L4-2.7L (1AR-FE) (2009)
13. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for RH
Side)/Removal
14. REMOVE REAR SEAT INNER TRACK BRACKET COVER See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for RH
Side)/Removal
15. REMOVE REAR SEAT OUTER TRACK BRACKET COVER See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for RH
Side)/Removal
16. DISCONNECT REAR SEAT RECLINING CONTROL CABLE See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for RH
Side)/Removal
17. REMOVE REAR SEAT ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for RH Side)/Removal
18. REMOVE RECLINING REMOTE CONTROL BEZEL RH
HINT: Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal.
19. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY
HINT: Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal.
20. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY RH
HINT: Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal.
21. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
22. REMOVE REAR POWER POINT SOCKET ASSEMBLY
(a) Using a screwdriver, disengage the 2 claws and remove the rear power point socket assembly as shown in the illustration.
Text in Illustration
HINT: Tape the screwdriver tip before use.
23. REMOVE REAR POWER POINT SOCKET COVER
(a) Disengage the 2 claws and remove the rear power point socket cover.
24. REMOVE SIDE TRIM COVER RH (w/ Voltage Inverter) See: Accessories and Optional Equipment/Entertainment Systems/Auxiliary Input /
Output Jack/Service and Repair/Removal
25. REMOVE POWER OUTLET SOCKET ASSEMBLY (w/ Voltage Inverter)