Venza AWD L4-2.7L (1AR-FE) (2009)
Removal
FRONT SUSPENSION: FRONT LOWER SUSPENSION ARM: REMOVAL
REMOVAL
HINT:
-
Use the same procedure for the LH side and RH side.
-
The following procedure listed below is for the LH side.
1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (for 2GR-FE)
HINT: Refer to the procedure up to Remove Engine Assembly with Transaxle See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Removal.
2. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (for 1AR-FE)