Venza AWD L4-2.7L (1AR-FE) (2009)
HINT: Use the shorter center bolt first, and then change it to the longer center bolt.
34. REMOVE REAR SUSPENSION MEMBER BODY MOUNTING REAR CUSHION (for RH Side)
HINT: Perform the same procedure as the LH side.
35. REMOVE HOLE PLUG
(a) Remove the 2 hole plugs.
36. REMOVE REAR NO. 2 BODY MOUNTING BRACKET SUB-ASSEMBLY LH
(a) Remove the 3 bolts and rear No. 2 body mounting bracket sub-assembly LH.
37. REMOVE REAR NO. 2 BODY MOUNTING BRACKET SUB-ASSEMBLY RH
HINT: Perform the same procedure as the LH side.
38. REMOVE STUD BOLT (for LH Side)
(a) Remove the stud bolt.
39. REMOVE STUD BOLT (for RH Side)
HINT: Perform the same procedure as the LH side.