Venza AWD L4-2.7L (1AR-FE) (2009)
/Page-1813006.png)
(a) Support the front axle using a jack and wooden block.
Text in Illustration
(b) Remove the 2 bolts and 2 nuts, and separate the front shock absorber with coil spring (lower side) from the steering knuckle.
NOTICE: When removing the nuts, keep the bolts from rotating.
(c) Remove the nut and 2 spacers on the front shock absorber with coil spring (upper side).
Text in Illustration
NOTICE: Make sure that the front speed sensor is completely separated from the front shock absorber with coil spring.
