Venza AWD L4-2.7L (1AR-FE) (2009)
/Page-1294002.png)
^
Warranty application is limited to occurrence of the specified condition described in this bulletin.
Parts Information
Required Tools & Equipment
Repair Procedure
1. Inspect the transaxle to determine if the transaxle case plug is installed.
Is the plug missing?
^
YES - Proceed to step 2.
^
NO - This TSB does NOT apply. Proceed with diagnosis of the ATF leak.
2. Install the missing transaxle case plug.
3. Adjust the ATF level.
Refer to the Technical Information System (TIS) applicable model and model year Repair Manual:
^
2010 Camry:
Drivetrain - Automatic Transmission/Transaxle - "U760E Automatic Transaxle: Automatic Transaxle Fluid: Adjustment"
^
2009 Venza:
Drivetrain - Automatic Transmission/Transaxle - "U760E / U760F Automatic Transaxle:
Automatic Transaxle Fluid: Adjustment"
4. Test drive the vehicle to confirm the repair.
