Venza AWD L4-2.7L (1AR-FE) (2009)
/Page-1331005.png)
(a) Engage the 4 claws to install the position indicator connector and position indicator light guide to the lower position indicator housing.
NOTICE: Make sure that the claws are firmly engaged.
10. INSTALL POSITION INDICATOR HOUSING SUB-ASSEMBLY
(a) Engage the 4 claws to install the position indicator housing sub-assembly to the lower position indicator housing.
NOTICE: Make sure that the claws are firmly engaged.
(b) Install the shift lever cap to the position indicator housing sub-assembly.
