Venza AWD L4-2.7L (1AR-FE) (2009)
NOTICE: In order to ensure proper sealing of the transmission oil pan bolts, apply sealant to the bolts and install them within 10 minutes of
sealant application.
5. INSTALL TRANSFER ASSEMBLY See: Transfer Case/Service and Repair/Removal and Replacement/Installation
6. INSTALL TORQUE CONVERTER CLUTCH ASSEMBLY See: Service and Repair/Removal and Replacement/Installation
7. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY
HINT: See the steps from "Install Automatic Transaxle Assembly" through "Check Automatic Transaxle System" See: Service and
Repair/Removal and Replacement/Installation.
8. CHECK AUTOMATIC TRANSAXLE SYSTEM
NOTICE: If automatic transmission parts have been replaced, refer to Parts Replacement Compensation Table to determine if any additional
operations are necessary See: Transmission Control Systems/Service Precautions.