Venza AWD L4-2.7L (1AR-FE) (2009)
1.25 mm (0.0492 in.)
(c) Lock the upper nut using the lower nut.
(d) Turn the upper nut and tighten the other 3 stud bolts to the electro magnetic control coupling sub-assembly in the same way.
Torque: 9.8 Nm (100 kgf-cm, 87in-lbf)
(A):
29.1 to 32.3 mm (1.15 to 1.27 in.)
HINT: If the threads of the electro magnetic control coupling sub-assembly are damaged while installing the stud bolt, replace the electro
magnetic control coupling sub-assembly with a new one.
43. REMOVE DIFFERENTIAL CARRIER ASSEMBLY
(a) Remove the differential carrier assembly from the overhaul attachment.