Venza AWD L4-2.7L (1AR-FE) (2009)
Control Module: Service and Repair
Installation
U760F AUTOMATIC TRANSMISSION / TRANSAXLE: TCM: INSTALLATION
INSTALLATION
1. INSTALL TCM
(a) Install the TCM to the transaxle.
(b) Install and tighten the 2 bolts in the order shown in the illustration.
Torque: 11 Nm (115 kgf-cm, 8ft-lbf)
(c) Connect the connector to the TCM.
(d) Turn the lock lever and secure the connector with the lock lever.
2. INSTALL BATTERY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation
3. INSTALL COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Repair Instruction - Initialization.
5. PERFORM TCM REGISTRATION
HINT: See: Transmission Control Systems/Testing and Inspection/Programming and Relearning/Registration.