Venza AWD L4-2.7L (1AR-FE) (2009)
Control Module: Service and Repair
Removal
U760F AUTOMATIC TRANSMISSION / TRANSAXLE: TCM: REMOVAL
REMOVAL
NOTICE: When the TCM is replaced, the existing transaxle compensation codes must be input into a new TCM See: Service Precautions.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Repair Instruction - Initialization.
2. REMOVE COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
3. REMOVE BATTERY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
4. REMOVE TCM
(a) Turn the lock lever and disconnect the connector from the TCM.
(b) Remove the 2 bolts and TCM from the transaxle.