Venza AWD L4-2.7L (1AR-FE) (2009)
HINT: If an area other than that specified, wipe off the primer with a non-residue solvent before it dries.
NOTICE:
-
To prevent the glass from breaking at low temperatures, ensure that no primer adheres to the contact surface between the moulding and
glass during application.
-
Allow the primer to dry for 3 minutes or more.
-
Throw away any leftover primer.
-
Do not apply too much primer.
(c) Apply adhesive to the front side fix window assembly.
Adhesive:
Toyota Genuine Windshield Glass Adhesive or equivalent
(1) Cut off the tip of the cartridge nozzle as shown in the illustration.
Standard Dimension:
(2) Load the sealer gun with cartridge.
(3) Apply adhesive to the front side fix window assembly as shown in the illustration.