Venza AWD L4-2.7L (1AR-FE) (2009)
/Page-2842007.png)
Standard Dimension:
NOTICE:
-
Do not apply too much primer.
-
Allow the primer to dry for 3 minutes or more.
-
Throw away any leftover primer.
HINT:
-
Apply Primer G onto the ceramic notches.
-
If an area other than that specified is coated by accident, wipe off the primer with a clean piece of cloth before it dries.
(d) Apply adhesive to the glass.
Adhesive:
Toyota Genuine Windshield Glass Adhesive or equivalent
(1) Cut off the tip of the cartridge nozzle as shown in the illustration.
Standard Dimension:
HINT: After cutting off the tip, use all adhesive within the time described in the table below.
Usage Time Frame:
(2) Load the sealer gun with cartridge.
(3) Apply adhesive to the windshield glass, as shown in the illustration.
