Venza AWD L4-2.7L (1AR-FE) (2009)
(a) Install the rear washer motor and pump assembly.
(b) Connect the connector.
(c) Connect the washer hose.
2. FILL WASHER JAR WITH WASHER FLUID
(a) Fill the washer jar with washer fluid.
3. INSTALL FRONT FENDER LINER RH See: Washer Motor (for Front Side)/Installation
4. INSTALL FRONT FENDER OUTSIDE MOULDING RH
HINT: Use the same procedure for the RH side and LH side See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch Release
Cable/Service and Repair/Installation.
5. INSTALL FRONT WHEEL RH