Venza AWD L4-2.7L (1AR-FE) (2009)
/Page-2884001.png)
Wiper Switch: Testing and Inspection
WIPER / WASHER: WIPER SWITCH: INSPECTION
INSPECTION
1. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Front Wiper Switch
Front Washer Switch
Rear Wiper Switch
Rear Washer Switch
If the result is not as specified, replace the windshield wiper switch assembly.
(b) Check the intermittent operation.
