Venza AWD V6-3.5L (2GR-FE) (2010)
3. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver
Side) See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Disassembly
4. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger
Side) See: Sensors and Switches/Sensors and Switches - Windows and Glass/Power Window Switch/Service and Repair/Front Passenger Side
Power Window Switch/Removal
5. REMOVE COURTESY LIGHT ASSEMBLY See: Lighting and Horns/Courtesy Lamp/Service and Repair/Removal
6. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
7. REMOVE FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
8. REMOVE DOOR SIDE AIRBAG SENSOR See: Restraint Systems/Air Bag Systems/Impact Sensor/Service and Repair/Side Airbag Sensor (for
Front Side)/Removal
9. REMOVE FRONT DOOR SERVICE HOLE COVER See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
10. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
11. REMOVE FRONT DOOR OUTSIDE HANDLE COVER WITH LOCK CYLINDER ASSEMBLY (for Driver Side) See: Body and
Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Disassembly
12. REMOVE FRONT DOOR OUTSIDE HANDLE COVER (for Front Passenger Side) See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Service and Repair/Disassembly
13. REMOVE FRONT DOOR OUTSIDE HANDLE ASSEMBLY
(a) Disengage the 2 claws.
(b) Disconnect the connector.
(c) Move the lever in the direction indicated by the arrow in the illustration.
(d) Remove the front door outside handle assembly as shown in the illustration.