Venza AWD V6-3.5L (2GR-FE) (2010)
Installation
THEFT DETERRENT / KEYLESS ENTRY: ENTRY LOCK AND UNLOCK SWITCH: INSTALLATION
1. INSTALL FRONT DOOR OUTSIDE HANDLE ASSEMBLY
(a) Insert the front end of the front door outside handle assembly into the front door outside handle frame.
(b) Insert the rear end of the front door outside handle assembly into the front door outside handle frame, then slide the front door outside handle
assembly toward the front of the vehicle to install it.
(c) Move the lever back in the direction indicated by the arrow in the illustration to lock the door outside handle assembly.
(d) Connect the connector.
(e) Engage the 2 claws.
2. INSTALL FRONT DOOR OUTSIDE HANDLE COVER (for Front Passenger Side) See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Service and Repair/Reassembly
3. INSTALL FRONT DOOR OUTSIDE HANDLE COVER WITH LOCK CYLINDER ASSEMBLY (for Driver Side) See: Body and
Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Reassembly
4. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Reassembly