Venza AWD V6-3.5L (2GR-FE) (2010)
Body Control Module: Service and Repair
Installation
POWER DISTRIBUTION: MAIN BODY ECU: INSTALLATION
1. INSTALL MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK ASSEMBLY)
(a) Install the 5 relays.
(b) Connect the 4 connectors.
(c) Connect the connector [A] as shown in the illustration.
NOTICE:
Be sure to engage each connector securely.
(d) Engage the 2 claws.
(e) Install the 3 nuts and install the main body ECU (driver side junction block assembly).
(f) Connect the 2 connectors.
NOTICE:
Be sure to engage the connector securely.
(g) Connect the connector [A] as shown in the illustration.