Venza AWD V6-3.5L (2GR-FE) (2010)
/Page-2253011.png)
Text in Illustration
18. REMOVE FRONT DOOR GLASS RUN
(a) Remove the front door glass run.
19. REMOVE FRONT DOOR REAR LOWER FRAME SUB-ASSEMBLY
(a) Remove the bolt and front door rear lower frame sub-assembly as shown in the illustration.
20. REMOVE FRONT DOOR OUTSIDE HANDLE COVER WITH LOCK CYLINDER ASSEMBLY (for Driver Side)
(a) Remove the hole plug.
(b) Using a T30 "TORX" socket wrench, loosen the screw and remove the front door outside handle cover with lock cylinder assembly.
