Venza AWD V6-3.5L (2GR-FE) (2010)
(e) Engage the 2 claws.
26. INSTALL FRONT DOOR OUTSIDE HANDLE COVER (for Driver Side)
(a) Engage the claw and install the front door outside handle cover to the front door lock cylinder.
27. INSTALL FRONT DOOR OUTSIDE HANDLE COVER (for Front Passenger Side)
(a) Using a T30 "TORX" socket wrench, install the front door outside handle cover with the screw.
Torque : 4.0 Nm (41 kgf-cm, 35 in-lbf)
(b) Install the hole plug.
28. INSTALL FRONT DOOR OUTSIDE HANDLE COVER WITH LOCK CYLINDER ASSEMBLY (for Driver Side)
(a) Install the front door outside handle cover with lock cylinder assembly.