Venza AWD V6-3.5L (2GR-FE) (2010)
Hood Sensor/Switch (For Alarm): Service and Repair
Removal
THEFT DETERRENT / KEYLESS ENTRY: ENGINE HOOD COURTESY SWITCH: REMOVAL
1. REMOVE COOL AIR INTAKE DUCT SEAL See: Bumper/Front Bumper/Service and Repair/Removal and Replacement/Removal
2. REMOVE RADIATOR GRILLE PROTECTOR See: Grille/Service and Repair/Removal
3. REMOVE RADIATOR GRILLE SUB-ASSEMBLY See: Grille/Service and Repair/Removal
4. REMOVE HIGH PITCHED HORN ASSEMBLY See: Lighting and Horns/Horn/Service and Repair/High Pitched Horn/Removal
5. REMOVE HOOD LOCK ASSEMBLY See: Hood Latch Release Cable/Service and Repair/Removal
6. REMOVE SECURITY COURTESY SWITCH
(a) Remove the spring.
(b) Remove the spring.
(c) Disengage the clamp and remove the 2 screws and security courtesy switch.