Venza AWD V6-3.5L (2GR-FE) (2010)
Liftgate Window Glass: Service and Repair
Installation
WINDOW / GLASS: BACK DOOR GLASS: INSTALLATION
1. INSTALL NO. 2 BACK WINDOW GLASS SPACER
(a) Apply Primer G to the installation part of the No. 2 back window glass spacer.
HINT
If primer is applied to an area that is not specified, wipe off the primer with a non-residue solvent before it dries.
(b) Install a new No. 2 back window glass spacer onto the back door glass, as shown in the illustration.
Text in Illustration
NOTICE:
*
RH and LH spacers are different parts.
*
Allow the primer to dry for 3 minutes or more.
*
Throw away any leftover primer.
*
Do not apply too much primer.
2. INSTALL NO. 1 BACK WINDOW GLASS SPACER
HINT
Use the same procedure for the RH side and LH side.
3. INSTALL BACK DOOR GLASS SPACER
(a) Apply Primer G to the installation part of the back window glass spacer.
HINT
If primer is applied to an area that is not specified, wipe off the primer with a non-residue solvent before it dries.
(b) Install 4 new back door glass spacers onto the back door glass, as shown in the illustration.