Venza AWD V6-3.5L (2GR-FE) (2010)
Trunk / Liftgate Interior Trim Panel: Service and Repair
DOOR / HATCH: BACK DOOR: DISASSEMBLY
DISASSEMBLY
1. REMOVE UPPER BACK WINDOW PANEL TRIM
(a) Disengage the 4 clips and 4 claws, and remove the upper back window panel trim.
2. REMOVE BACK DOOR PANEL TRIM ASSEMBLY
(a) Disengage the 16 clips and remove the back door panel trim assembly.
To Install reverse Removal procedure.