Venza AWD V6-3.5L (2GR-FE) (2010)
Trunk / Liftgate Switch: Service and Repair
Power Back Door Main Switch
Components
DOOR / HATCH: POWER BACK DOOR MAIN SWITCH: COMPONENTS
Removal
DOOR / HATCH: POWER BACK DOOR MAIN SWITCH: REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE LH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and Replacement/Removal
2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
3. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Removal
4. REMOVE POWER BACK DOOR MAIN SWITCH
(a) Disengage the 2 claws and remove the power back door main switch.
Installation