Venza AWD V6-3.5L (2GR-FE) (2010)
Standard Measurement
4. INSTALL HOOD EMBLEM
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove any double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Clean the name plate (if reusing the name plate).
(1) Using a heat light, heat the name plate.
(2) Remove the double-sided tape from the name plate.
(3) Wipe off any tape adhesive residue with cleaner.
(4) Apply new double-sided tape to the name plate.
(c) Install the hood emblem.
(1) Using a heat light, heat the vehicle body and the hood emblem.
(2) Remove the release paper from the hood emblem.
HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.
(3) Install the hood emblem as shown in the illustration.