Venza AWD V6-3.5L (2GR-FE) (2010)
NOTICE:
Position the front suspension member body mounting front cushion in the correct direction.
(b) Using SST, install the front suspension member body mounting front cushion as shown in the illustration.
Text in Illustration
SST : 09830-10010
09830-01010
09830-01020
09830-01030
09830-01060
NOTICE:
Make sure that there is no clearance between the front suspension member and front suspension member body mounting rear
cushion.
4. INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING REAR STOPPER
5. INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING FRONT STOPPER
6. INSTALL FRONT SUSPENSION MEMBER DYNAMIC DAMPER (for 2WD)
(a) Install the front suspension member dynamic damper with the 2 bolts.