Venza AWD V6-3.5L (2GR-FE) (2010)
49. FULLY TIGHTEN REAR NO. 2 SUSPENSION ARM ASSEMBLY LH See: Steering and Suspension/Suspension/Control Arm/Service and
Repair/Rear Lower Arm/Installation
50. FULLY TIGHTEN REAR NO. 2 SUSPENSION ARM ASSEMBLY RH See: Steering and Suspension/Suspension/Control Arm/Service and
Repair/Rear Lower Arm/Installation
51. INSPECT AND ADJUST REAR WHEEL ALIGNMENT
(a) Inspect and adjust the rear wheel alignment See: Maintenance/Alignment/Service and Repair.
52. CHECK FOR SPEED SENSOR SIGNAL
(a) Check for the speed sensor signal See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and
Inspection/Initial Inspection and Diagnostic Overview/Test Mode Procedure.
53. HEIGHT CONTROL SENSOR SIGNAL INITIALIZATION (w/ HID Headlight System)
(a) Initialize the height control sensor signal See: Lighting and Horns/Testing and Inspection/Programming and Relearning/Exterior Lighting
System/Initialization.
54. INSPECT AND ADJUST HEADLIGHT AIMING (w/ HID Headlight System)
(a) Inspect and adjust the headlight aiming See: Lighting and Horns/Headlamp/Adjustments.