Venza AWD V6-3.5L (2GR-FE) (2010)
NOTICE:
Do not damage the roof headlining assembly or body interior.
Installation
INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION
1. INSTALL ROOF HEADLINING ASSEMBLY (w/o Sliding Roof)
(a) Pull the roof headlining assembly into the vehicle through the back door.
NOTICE:
Do not damage the roof headlining assembly or body interior.
(b) Install the 3 clips.
(c) Connect the No. 2 antenna cord sub-assembly connector and washer hose to the rear pillar RH.
(d) w/ Rear Seat Entertainment System:
(1) Connect the No. 2 roof wire connector and engage the clamp to the rear pillar RH.
(e) Connect the No. 2 antenna cord sub-assembly connectors and washer hose, and engage the 5 clamps to the front pillar RH.
(f) w/ EC Mirror:
(1) Connect the No. 1 roof wire connector to the inner rear view mirror.
(g) Connect the No. 1 roof wire connectors and engage the 4 clamps to the front pillar LH.