Venza AWD V6-3.5L (2GR-FE) (2010)
NOTICE:
After installation, check that the corners fit correctly.
52. INSTALL REAR DOOR SCUFF PLATE LH
(a) Engage the 2 clips and 6 claws to install the rear door scuff plate LH.
53. INSTALL FRONT PILLAR GARNISH LH
(a) Engage the 3 guides.
(b) Turn the end of the front pillar garnish clip 90° with needle-nosed pliers and install it to the front pillar garnish RH.
HINT
Tape the needle-nosed pliers tip before use.
(c) Engage the 2 clips to install the front pillar garnish LH.
54. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
(a) Align the alignment mark (Yellow) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and
install the front door opening trim weatherstrip LH.