Venza AWD V6-3.5L (2GR-FE) (2010)
/Page-2367002.png)
(b) Disengage the clamp and remove the electrical key oscillator.
NOTICE:
Be careful when removing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.
Installation
THEFT DETERRENT / KEYLESS ENTRY: ELECTRICAL KEY OSCILLATOR (for Front Floor): INSTALLATION
1. INSTALL ELECTRICAL KEY OSCILLATOR
(a) Engage the clamp and install the electrical key oscillator.
NOTICE:
Be careful when installing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.
(b) Connect the connector.
2. INSTALL CONSOLE BOX ASSEMBLY See: Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Installation
3. INSTALL NO. 2 CONSOLE BOX CARPET See: Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Installation
4. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Seat Heater System) See: Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Installation
5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Seat Heater System) See: Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Installation
