toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Door Control Switch|Page 8505 > < Door Control Switch|Page 8503
Page 2
background image

6. REMOVE STEERING WHEEL ASSEMBLY   See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Removal

7. REMOVE LOWER STEERING COLUMN COVER   See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and

Replacement/Removal

8. REMOVE UPPER STEERING COLUMN COVER   See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and

Replacement/Removal

9. REMOVE TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY   See: Steering and Suspension/Steering/Steering

Column/Service and Repair/Removal and Replacement/Removal

10. REMOVE UNLOCK WARNING SWITCH

(a) Disconnect the connector.

(b) Insert the key into the ignition key cylinder.

(c) Disengage the 2 claws and remove the unlock warning switch from the steering column upper bracket.

Installation

DOOR LOCK: UNLOCK WARNING SWITCH: INSTALLATION

1. INSTALL UNLOCK WARNING SWITCH

(a) Engage the 2 claws and install the unlock warning switch to the steering column upper bracket.

(b) Extract the key.

(c) Connect the connector.

Door Control Switch|Page 8505 > < Door Control Switch|Page 8503