Venza AWD V6-3.5L (2GR-FE) (2010)
Seat)/Disassembly
12. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY See: Service and Repair/Overhaul/Front Seat Assembly (for Power
Seat)/Disassembly
13. REMOVE FRONT SEATBACK COVER WITH PAD See: Service and Repair/Overhaul/Front Seat Assembly (for Power Seat)/Disassembly
14. REMOVE SEPARATE TYPE FRONT SEATBACK COVER
(a) Remove the 10 hog rings and the separate type front seatback cover.
(b) Cut off the 12 tack pins that fasten the seat heater, and then remove the separate type front seatback heater from the front separate type
seatback cover.
Installation
SEAT: FRONT SEATBACK HEATER: INSTALLATION
1. INSTALL SEPARATE TYPE FRONT SEATBACK COVER
(a) Using a tacker, install the separate type front seatback heater to the end of the separate type front seatback cover with 12 new tack pins.