Venza AWD V6-3.5L (2GR-FE) (2010)
(f) Remove the 3 nuts and parking brake pedal assembly.
Installation
PARKING BRAKE: PARKING BRAKE PEDAL: INSTALLATION
1. INSTALL PARKING BRAKE PEDAL ASSEMBLY
(a) Install the parking brake pedal assembly with the 3 nuts.
Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)
(b) Connect the parking brake switch connector.
(c) Install the No. 1 parking brake cable assembly with the nut and 4 bolts.